This handy little DCC decoder can be used to drive LEDs in a variety of lighting applications. It can be used to drive 3-LED signal heads or individual LEDs. No external resistors are needed as they are on the board. You can control the relative brightness of the LEDs with CVs as well the turn on and off rates. it is set up for JMRI - type Double Output. Can also be used to light a building or a passenger car. With the flicker function it can imitate a flickering light bulb, a welding arc or a campfire. Although the outputs are marked R Y G for ease of wiring to a signal head, any color LED can be used. In addition there is a mode for driving a 2-lead bi-color LED.
The decoder uses 2 consecutive DCC addresses - one controls the R output and the other controls the G output. If both are on then the Y output is lit.
Discontinued - LEDecoder - 3 Output Accessory Decoder for LEDs
This handy little lighting decoder has numerous uses. It uses 2 DCC addresses and has built-in resistors. Can be used with JMRI for signaling. Can also be used for DCC controlled lighting of buildings and passenger cars. The flicker function imitates arc welding, flickering lights and fires. Size: 1.5" x 1.0".